Ideal combination for noise and vibration measurements
The combination of SA-102B's hardware and noise and vibration measurement software (AS-201) allows you to create a powerful system that can measure vibration and noise generated from various products.

Composition
1. AS-201 software (USB KEY)
2. SA-102B hardware (ASIO supported Audio Interface and Input Control Amplifier)

Elasticity
Two inputs (maximum 4) with CCP function can freely connect microphones or vibration sensors.
You can also connect a microphone or vibration sensor at the same time.

Automation
It can be executed as a remote control command from an automation device such as a PLC.
This provides a control environment where the automation equipment becomes the main system and the measuring device becomes the sub-system.

Measurement Options
Users can select and configure a test system to suit their application requirements.
You can freely configure everything from a simple measurement system to a complex and advanced abnormal noise measurement system.

Composition of input
The SA-102B has two unbalanced inputs.
The CCP function of unbalanced input can receive signals directly from a standard microphone or vibration sensor.

An ideal combination for measuring analog and digital I/O
ASIO support for use with AS-202 measurement Software Choose your audio interface to either a hardware SA-242 Or When combined with the SA-248(4Channel ~16Channel -Option), a powerful system can be configured.

Composition
1. AS-202 Software (USB KEY)
2. ASIO Support Audio Interface
3. SA-242 or SA-248 (In/Output Control Amplifier)

Flexibility
The Multi Analyzer System is compatible with ASIO enabled audio interfaces.
You can choose an interface product that meets your measurement performance requirements.

configurability
Depending on your testing requirements, you can select measurement options.
From affordable basic options to feature-rich measurement solutions.

Automation
Freely configured measurement sequences can be executed by remote control commands from automation devices such as PLCs.
This provides a control environment where the automation facility becomes the main and the measuring instrument becomes the sub-system.

measurement option
Users can select and configure the test system according to the requirements of the application.
It can be freely configured from a simple measurement system to a complex and sophisticated measurement system.


Variety of I/O
The SA-248A has four balanced and unbalanced analog inputs and outputs.
SA-242A has 4 balanced outputs and 8 unbalanced analog inputs.
The CCP function of unbalanced input can directly receive signals from standard microphones or vibration sensors.
There are also digital inputs and outputs via TOSLINK and SPDIF and HDMI, ASE/EBU.
These versatile I/Os provide solutions for measuring individual speakers, TVs, soundbars, digital amplifiers, analog amplifiers and more.

Output
4Channel Balanced XLR
AES / EBU - SPDIF (Optical)
HDMI
Input
8Channel Unbalanced BNC-CCP Microphone
AES / EBU - SPDIF (Optical)

• Frequency Response (Force, Fo, Qms, Current, Noise)
• Noise Response
• Fc, F1, F2
• Ringing
• Vibration Level (Force, Current, Rising Time, Falling Time, Noise, Polarity)
• Durability Test Mode

Vibration Analyzer is a signal analyzing equipment which is able to measure all testing items of Linear Motor at the same time.
Measuring items can be set as Step and order of Step can be changed arbitrarily, and 2Channels can be measured independently or simultaneously.
Reliability test of Linear Motor can be done by continuous drive test.
When the failure occurs during the measurement, you can measure it again and all the data are stored in file